TrioVision has capabilities to process any complex shapes in open molding process without limitation to size. Using skilled resources, desired resin to glass ratio can be achieved with consistency in weight and thickness.

We have processed close to 6000 square meter of tools and produced more than 100 tons of resin in various projects in Open Molding.

The hand layup method is one of the most common, easy, and inexpensive open molding methods for the fabrication of UPR composites because it requires simple equipment. In a hand layup approach, first a release gel is applied onto the surface of a mold to avoid the stabbing of polymer. Fiber reinforcements are placed in a mold and UPR is mixed with a suitable curing agent/catalyst/ accelerator and poured onto the surface and then uniformly spread over the mold using a brush or roller. The curing process is carried out at room temperature or the required temperature based on the UPR and the catalyst/accelerator used, later, the mold is opened and the fabricated composite is taken out and used for further modifications.